12000 BTU 21.5 SEER Inverter Ductless Mini Split Air Conditioner Heat

12000 BTU Ductless Mini Split AC: 21.5 SEER Inverter w/ 12,000 BTU Heat Pump Thermocore T322S-H112 Energy Star Ductless Mini Split - 12000 BTU Cooling Capacity along with a 12,000 BTU Heat Pump, this 1 TON Energy Star Ductless Split can cool or heat an area over 600 ft². 120VAC OPERATION.Advanced INVERTER DC Technology provides both energy efficient operation and low ambient temps down to -13F. Additional features include auto-diagnostic functions and sleep mode / 24 hour timer. Pre-charged with R410A and includes 16ft install Kit. Technical Data: System Includes: 12,000 BTU INVERTER Cooling Capacity 11,800 BTU INVERTER Heat Pump 21.5 SEER - 11.2 HSPF - AHRI / ENERGY STAR Certified

*

Pre-Charged with ECO-Friendly R410A - Hyper Heat -13F

1 Year Parts - 5 Year Compressor Warranty

Indoor Unit - Air Handler.

Outdoor Unit - Compressor.

Digital Multi-function LCD Remote Control

Installation Kit with 15' of lineset.

Product and Installation Manual.

Top Line Features: 21.5 SEER - 10 HSPF

- ENERGY STAR

Pre-Charged w/ Eco-friendly R410A Refrigerant

Operates on Standard 120 VAC Power Input

Cross Flow Technology reduces noise output

Compatible with over 5 filtration medias

Freon Leak Detection > Notification system

Low Ambient Temperature Operation (-13° F)

Two-direction Air vane Evenly Distributes Air

Restart IC: Settings restored Following Outage

Follow-Me Function tracks Remote Location

The particle filter or “pre-filter” removes dust and other air-borne pathogens before pushing the air through additional filtration medias and the refrigeration coil array. This filter is washable and comes factory installed with every ductless air conditioner system. The open channel construction of the 3M High Air Flow (HAF) filter offers low initial airflow resistance, while its unique microstructure and electrostatic charge provides effective particle capture and retention. This translates into fewer filter change outs and reduced coil cleaning. The Vitamin C Filtration media releases Vitamin C into the air which softens skin and reduces stress among other therapeutic benefits. A good choice for those wanting to add some invigoration to their indoor air environment. Filter lasts over 2 years. The anti-microbial effect of silver ionic technology kills allergy causing bacteria by destroying the inner configuration elements of the cell body. The nano-silver attached to the filter screen constantly releases silver ions which directly eliminates and prohibits bacteria from replicating. Eliminates odors such as ammonia and deactivates harmful chemicals has such as formaldehyde. By forming positive positions on the filter surface, Electrostatic Fiber traps small dust particles, smoke and pet dander to prevent allergic reactions and neutralize odor in the air. Model Number
Thermocore T322S-H112 Compressor
TOSHIBA (GMCC) Refrigerant
R410A (Pre-Charged)/40.6oz Cooling / Heating Capacity
12000 BTU/ 11800 BTU Air Flow
306/212/147 CFM Power Supply
120 V / 60 Hz, 1Ph Input Power
960W (cooling) / 1120W (heating) Rated Current
8.4A (Cooling) / 9.8A (heating) Maximum Fuse
20A Connection Wire
16 AWG/4: Indoor>Outdoor | 12 AWG/3 Outdoor>Power Supply SEER
21.5 EER
12.5 HSPF4
11.2 Pre-charge Length
25ft (R-410A) Maximum Pipe Length
80ft Sound Level
36/29/25(indoor) / 52dB (outdoor) Moisture Removal
1.2 L/hr Min Operating Temperature
-13 F Net Weight
18 Lbs (Indoor) / 82 Lbs (Outdoor) Dimensions (WXDxH)
31.5 x 7.5 x 11 in (Indoor Unit) – 31.5 x 13.15 x 21.75 in (Outdoor Unit) Warranty
1 Year on Parts / 5 Years on Compressor Install Kit Contents: 15 Feet Flared Copper Tubing 15 Feet Pipe Insulation 15 Feet Electrical Wire Harness Drain Pipe (Indoor)

Indoor wall Mounting Bracket

Remote Control Wall Bracket Wall Hole Block Putty & Insulated Tape *** Extend 15 foot copper lineset to 25-30-40-50-65 feet. Just $4.50 / foot*** WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split. It is highly advised a certified HVAC technician complete installation to be eligible for warranty. *5 Year Compressor - 1 Year on all other Parts*
Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns.Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and a brand new exchange will be shipped out. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! Our Thermocore systems ship via or similar LTL freight service out of Warren, Michigan and are palletized onto a single skid. Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located. Please provide a contact phone# upon checkout (to be used for delivery purposes only). SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. Condenser Ground Stand - Provides Flat even surface - Avoids debris obstruction Price: $73.00 Lineset Extension (1/4 x 3/8) - Extend included 16 ft copper lineset to 25ft - 30ft - 40ft - 50ft Price: $38.00 > $134.00 Condenser Bracket - Mount your condenser at any height on an outdoor sidewall Price: $46.00 Micro-Pump II - Required when mounting air handler on Interior wall Price: $199.00 Electrical Wire Harness - 16/4 Electrical Wire Harness - For Extending Evap. Length Price: $2.15 / ft Additional Remote Controls - Spare remote controls for the T1 Series Ductless System Price: $42.00 Filter Medias - Inserts into Filter Screen Slot - Choice of 4 Filtration Medias Price: $10.00 - $14.00 Wired Thermostat - Permanently Hard Mounts - Controls Settings w/ Remote Price: $98.00

Returns Accepted for this item if it's within 30 Days